Bộ nguồn 24V 2.1A PKS-50-24 PKI-50-24

±0.5%

±0.5%

±0.5%

±0.5%

LOAD REGULATION Note.5

±0.5%

±0.5%

±0.5%

±0.5%

±0.5%

SETUP, RISE TIME

500ms, 30ms/230VAC 1200ms, 30ms/115VAC at full load

HOLD UP TIME (Typ.)

50ms/230VAC 10ms/115VAC at full load

      INPUT

VOLTAGE RANGE

85 ~ 264VAC 120-370VDC

FREQUENCY RANGE

47 - 63Hz

EFFICIENCY(Typ.)

79%

82%

83%

86%

87%

AC CURRENT (Typ.)

1.1 A/115 VAC 0.65A/230VAC

INRUSH CURRENT (Typ.)

COLD START45A

LEAKAGE CURRENT

<2mA/240VAC

   PROTECTION

OVERLOAD

110 ~ 150% rated output power

Protection type: Hiccup mode, recovers automatically after fault condition is removed

OVERVOLTAGE

5.75-6.75V

13.8 ~ 16.2V

17.25-20.25

27.6 - 32.4V

55.2-64.8V

Protection type: Shut down o/p voltage, re-power on to recover

  ENVIRONMENT

WORKING TEMP.

-20 ~ +60°C (Refer to "Derating Curve")

WORKING HUMIDITY

20 ~ 90% RH non-condensing

STORAGE TEMP., HUMIDITY

-40 ~ +85°C, 10 ~ 95% RH

TEMP. COEFFICIENT

±0.03%/°C (0 ~ 45°C)

VIBRATION

10 - 500Hz, 2G 10min./1 cycle, period for 60min. each along X, Y, Z axes

     SAFETY &

        EMC

     (Note 7)

SAFETY STANDARDS Note.6

UL60950-1, CB(IEC60950-1),CCC GB4943.1:2011 approved

WITHSTAND VOLTAGE

l/P-0/P:1.5KVAC l/P-FG:1.5KVAC 0/P-FG:0.5KVAC

ISOLATION RESISTANCE

l/P-O/P, l/P-FG, 0/P-FG:100M Ohms / 500VDC / 25°C/ 70% RH

EMC EMISSION

Compliance to EN55022 (CISPR22) Class B, EN61000-3-2,-3

EMC IMMUNITY

Compliance to EN61000-4-2,3,4,5,6,8,11, EN55024, EN61000-6-1, light industry level, criteria A

     OTHERS

MTBF

374.2K hrs min. MIL-HDBK-217F (25°C)

DIMENSION

129*98*38mm (L*W*H)

PACKING

0.41 Kg; 30pcs/13.3Kg/0.72CUFT

      NOTE

1.All parameters NOT specially mentioned are measured at 230VAC input, rated load and 25°C of ambient temperature.

2.Ripple & noise are measured at 20MHz of bandwidth by using a 12" twisted pair-wire terminated with a 0.1 uf & 47uf parallel capacitor.

3.Tolerance : includes set up tolerance, line regulation and load regulation.

4.Line regulation is measured from low line to high line at rated load.

5.Load regulation is measured from 0% to 100% rated load.

6.For the request of GB4943.1 ,the power supply is only suitable for use in the altitude 2000m below and the non tropical climate condition.

7.The power supply is considered a component which will be installed into a final equipment. The final equipment must be re-confirmed that it still meets EMC directives. For guidance on how to perform these EMC tests, please refer to “EMI testing of component power supplies.”

(as available on http://www.meanwell.com)

MODEL

PKS-50-5

PKS-50-12

PKS-50-15

PKS-50-24

PKS-50-48

     OUTPUT

DC VOLTAGE

5V

12V

15V

24V

48V

RATED CURRENT

10A

4.2A

3.4A

2.2A

1.1A

CURRENT RANGE

0 ~ 10A

0 ~ 4.2A

0 ~ 3.4A

0-2.2A

0-1.1A

RATED POWER

50W

50.4W

51W

52.8W

52.8W

RIPPLE & NOISE (max.) Note.2

80mVp-p

120mVp-p

150mVp-p

200mVp-p

240mVp-p

VOLTAGE ADJ. RANGE

4.75 - 5.5V

10.8- 13.2V

13.5-16.5V

21.6-26.4V

43.2 - 52.8V

VOLTAGE TOLERANCE Note.3

±2.0%

±1.0%

±1.0%

±1.0%

±1.0%

LINE REGULATION Note.4

±0.5%

±0.5%

±0.5%

±0.5%

±0.5%

LOAD REGULATION Note.5

±0.5%

±0.5%

±0.5%

±0.5%

±0.5%

SETUP, RISE TIME

500ms, 30ms/230VAC 1200ms, 30ms/115VAC at full load

HOLD UP TIME (Typ.)

50ms/230VAC 10ms/115VAC at full load

      INPUT

VOLTAGE RANGE

85 ~ 264VAC 120-370VDC

FREQUENCY RANGE

47 - 63Hz

EFFICIENCY(Typ.)

79%

82%

83%

86%

87%

AC CURRENT (Typ.)

1.1 A/115 VAC 0.65A/230VAC

INRUSH CURRENT (Typ.)

COLD START45A

LEAKAGE CURRENT

<2mA/240VAC

   PROTECTION

OVERLOAD

110 ~ 150% rated output power

Protection type: Hiccup mode, recovers automatically after fault condition is removed

OVERVOLTAGE

5.75-6.75V

13.8 ~ 16.2V

17.25-20.25

27.6 - 32.4V

55.2-64.8V

Protection type: Shut down o/p voltage, re-power on to recover

  ENVIRONMENT

WORKING TEMP.

-20 ~ +60°C (Refer to "Derating Curve")

WORKING HUMIDITY

20 ~ 90% RH non-condensing

STORAGE TEMP., HUMIDITY

-40 ~ +85°C, 10 ~ 95% RH

TEMP. COEFFICIENT

±0.03%/°C (0 ~ 45°C)

VIBRATION

10 - 500Hz, 2G 10min./1 cycle, period for 60min. each along X, Y, Z axes

     SAFETY &

        EMC

     (Note 7)

SAFETY STANDARDS Note.6

UL60950-1, CB(IEC60950-1),CCC GB4943.1:2011 approved

WITHSTAND VOLTAGE

l/P-0/P:1.5KVAC l/P-FG:1.5KVAC 0/P-FG:0.5KVAC

ISOLATION RESISTANCE

l/P-O/P, l/P-FG, 0/P-FG:100M Ohms / 500VDC / 25°C/ 70% RH

EMC EMISSION

Compliance to EN55022 (CISPR22) Class B, EN61000-3-2,-3

EMC IMMUNITY

Compliance to EN61000-4-2,3,4,5,6,8,11, EN55024, EN61000-6-1, light industry level, criteria A

     OTHERS

MTBF

374.2K hrs min. MIL-HDBK-217F (25°C)

DIMENSION

129*98*38mm (L*W*H)

PACKING

0.41 Kg; 30pcs/13.3Kg/0.72CUFT

      NOTE

1.All parameters NOT specially mentioned are measured at 230VAC input, rated load and 25°C of ambient temperature.

2.Ripple & noise are measured at 20MHz of bandwidth by using a 12" twisted pair-wire terminated with a 0.1 uf & 47uf parallel capacitor.

3.Tolerance : includes set up tolerance, line regulation and load regulation.

4.Line regulation is measured from low line to high line at rated load.

5.Load regulation is measured from 0% to 100% rated load.

6.For the request of GB4943.1 ,the power supply is only suitable for use in the altitude 2000m below and the non tropical climate condition.

7.The power supply is considered a component which will be installed into a final equipment. The final equipment must be re-confirmed that it still meets EMC directives. For guidance on how to perform these EMC tests, please refer to “EMI testing of component power supplies.”

(as available on http://www.meanwell.com)